Popular Post

journeyman machinist

images journeyman machinist. journeyman machinist. GERSTNER Journeyman MACHINIST
  • GERSTNER Journeyman MACHINIST



  • Gravitation
    03-25 08:27 AM
    Ok, so everytime I see a rent vs buy discussion I see apartment living compared with living in a house. This may not apply to a lot of other places but here's how it goes in SF Bay Area:

    Rental
    Apartment: Decent sized 2 Bed/2 Bath --- $1600 pm
    House : Decent sized 3 bed/2.5 bath --- $2000 pm

    Mortgage:
    House : Decent sized 3 bed/2.5 bath --- $3500 pm

    So, is additional 1500 pm worth the money? Why not rent a house? What's the point of trying to get into a sliding market when even Greenspan can't say where the bottom is?

    I am in a decent sized apartment right now and if I have to upgrade its a rental house. Buying in a sliding real estate market doesn't make sense to me.

    Buying a house is a long term move. Not a short term. The payment for house will remain (pretty much) the same for 30 years! Rental prices will go up every year. And after 30 years of payments, the house will be all yours.

    You're also neglecting the tax savings. There'll be appx. $900 per month in tax saving (assuming 25% tax bracket).

    Unless you can think and plan 5~10 years ahead (at least), real estate is not for you.





    wallpaper GERSTNER Journeyman MACHINIST journeyman machinist. Journeyman Machinist Required trends graph
  • Journeyman Machinist Required trends graph



  • truthinspector
    01-07 06:55 PM
    HAMAS fired 20 rockets into Israel as soon as the 3-hr humanitarian truce was over .
    Do you at least get it now? The real problem is HAMAS. For any Islamic conflict there is only one policy the Islamic radicals have, "Our Way or Suicide Bomb Way"..Guess what , every government in the world is not as spineless as Indian government. There are some like Israel who are going to stand up for themselves and rightfully so.


    Before blaming muslims try to understand the fact and know atleast a little history. When you have time just read this.

    http://www.guardian.co.uk/world/2009/jan/07/gaza-israel-palestine

    news article written by Oxford professor of international relations Avi Shlaim served in the Israeli army.





    journeyman machinist. Tree journeyman 425 for sale
  • Tree journeyman 425 for sale



  • nojoke
    04-15 03:42 PM
    I am on H1B and I485 is pending. I just bought a mid-price house and I will recommend to buy only if your I140 is approved. I waited for many years but finally bought one. Buying the house was a big decision but I am glad that I took it. I have a 3 year old daughter and she being able to run in our own backyard is worh of some financial risk. The house prices are lower (still I think a little higher than it should be) and the interest rate is good too. So, go for it and good luck.

    go for it? When the housing market is crashing and when we have recession, everyone buy the over inflated houses?:confused: House prices are lower?:(
    The market is crashing because the house prices are so much inflated that people are not buying. This is why you see record foreclosures. Infact some of them sold at the height of the bubble and made large profits and are now renting. They are waiting for the market to fall further. This whole market is a ponzi scheme with flippers buying and selling each other.





    2011 Journeyman Machinist Required trends graph journeyman machinist. journeymen machinists
  • journeymen machinists



  • abracadabra102
    08-06 05:16 PM
    Thompson, Ritchie and Kernighan admit that Unix was a prank

    In an announcement that has stunned the computer industry, Ken Thompson, Dennis Ritchie and Brian Kernighan admitted that the Unix operating system and C programming language created by them is an elaborate prank kept alive for over 20 years. Speaking at the recent UnixWorld Software Development Forum, Thompson revealed the following:

    "In 1969, AT&T had just terminated their work with the GE/Honeywell/AT&T Multics project. Brian and I had started work with an early release of Pascal from Professor Niklaus Wirth's ETH Labs in Switzerland and we were impressed with its elegant simplicity and power. Dennis had just finished reading 'Bored of the Rings', a National Lampoon parody of the Tolkien's 'Lord of the Rings' trilogy. As a lark, we decided to do parodies of the Multics environment and Pascal. Dennis and I were responsible for the operating environment. We looked at Multics and designed the new OS to be as complex and cryptic as possible to maximize casual users' frustration levels, calling it Unix as a parody of Multics, as well as other more risque! allusions. We sold the terse command language to novitiates by telling them that it saved them typing.

    Then Dennis and Brian worked on a warped version of Pascal, called 'A'. 'A' looked a lot like Pascal, but elevated the notion of the direct memory address (which Wirth had banished) to the central concept of the "pointer" as an innocuous sounding name for a truly malevolent construct. Brian must be credited with the idea of having absolutely no standard I/O specification: this ensured that at least 50% of the typical commercial program would have to be re-coded when changing hardware platforms.

    Brian was also responsible for pitching this lack of I/O as a feature: it allowed us to describe the language as "truly portable". When we found others were actually creating real programs with A, we removed compulsory type-checking on function arguments. Later, we added a notion we called "casting": this allowed the programmer to treat an integer as though it were a 50kb user-defined structure. When we found that some programmers were simply not using pointers, we eliminated the ability to pass structures to functions, enforcing their use in even the simplest applications. We sold this, and many other features, as enhancements to the efficiency of the language. In this way, our prank evolved into B, BCPL, and finally C.

    We stopped when we got a clean compile on the following syntax: for(;P("\n"),R-;P("|"))for(e=C;e-;P("_"+(*u++/8)%2))P("| "+(*u/4)%2);

    At one time, we joked about selling this to the Soviets to set their computer science progress back 20 or more years.

    Unfortunately, AT&T and other US corporations actually began using Unix and C. We decided we'd better keep mum, assuming it was just a passing phase. In fact, it's taken US companies over 20 years to develop enough expertise to generate useful applications using this 1960's technological parody. We are impressed with the tenacity of the general Unix and C programmer. In fact, Brian, Dennis and I have never ourselves attempted to write a commercial application in this environment.

    We feel really guilty about the chaos, confusion and truly awesome programming projects that have resulted from our silly prank so long ago."

    Dennis Ritchie said: "What really tore it (just when ADA was catching on), was that Bjarne Stroustrup caught onto our joke. He extended it to further parody Smalltalk. Like us, he was caught by surprise when nobody laughed. So he added multiple inheritance, virtual base classes, and later ...templates. All to no avail. So we now have compilers that can compile 100,000 lines per second, but need to process header files for 25 minutes before they get to the meat of "Hello, World".

    Major Unix and C vendors and customers, including AT&T, Microsoft, Hewlett-Packard, GTE, NCR, and DEC have refused comment at this time.

    Borland International, a leading vendor of object-oriented tools, including the popular Turbo Pascal and Borland C++, stated they had suspected for Windows was originally written in C++. Philippe Kahn said: "After two and a half years programming, and massive programmer burn-outs, we re-coded the whole thing in Turbo Pascal in three months. I think it's fair to say that Turbo Pascal saved our bacon". Another Borland spokesman said that they would continue to enhance their Pascal products and halt further efforts to develop C/C++.

    Professor Wirth of the ETH Institute and father of the Pascal, Modula 2, and Oberon structured languages, cryptically said "P.T. Barnum was right." He had no further comments.



    more...


    journeyman machinist. a journeyman machinist),
  • a journeyman machinist),



  • Refugee_New
    01-07 09:28 AM
    Hey Refugee_New, why the hell you gave me red ("what other site - refugee!").
    Go ahead & post it on the some news websites THAT ARE NOT RELATED WITH EB ISSUES. THIS FORM IS ONLY FOR EMPLOYMENT BASED IMMIGRATION RELATED ISSUES PERIOD & END OF DISCUSSION.
    As I already said it is very sad to hear innocent kids got killed. Opening a thread here & giving your baseless comments will not going to help the ppl suffering over there so why not you go over there and help them out by fighting with Israeli forces instead of whining here.

    GCBatman, i didn't give you red. Let me know how to give red or green. I never tried this before.





    journeyman machinist. journeyman machinist.
  • journeyman machinist.



  • ThinkTwice
    09-26 02:35 PM
    I like Mccain to be the president. Based on his experience and his involvement for the country.

    Also Mccain is a great candidate for us.

    "involvement" ...how does that qualify some one to be president, I am not for McSame or Obama but I know one thing for sure... Who ever is the next president has his work cut out and what this country needs is a visionary leader, not some one with the same of what has got this country into this mess.



    more...


    journeyman machinist. va journeyman machinist.
  • va journeyman machinist.



  • manub
    07-08 09:39 PM
    Thank You for all the support.
    I couldn`t reply any sooner.I was busy with Open house( a whole lot of scrubbing and cleaning).
    I cannot post the contents of the RFE`s as most of the info is private and not appropriate for the public forum.But the info I got from the forum so far has been helpful.
    What we are trying to do now is to get appointments with atleast 2 other attorneys(murthy and khanna) .our current Lawyer responded to our questions on a sunday .Not many lawyers do that. and we have only 2 weeks to respond Once we get some answers we`ll go from there.
    Our case is very complex.I don`t want other members be discouraged by the amount of papers uscis requested.Not every one gets this unlucky.They asked for all w2`s,first and last paystubs with each employer and federal tax returns.Rule of thumb don`t discard any paper that you ever submitted to uscis and all your employment records.
    I will keep you posted.
    thank you again.





    2010 Tree journeyman 425 for sale journeyman machinist. journeyman machinist.
  • journeyman machinist.



  • shantanup
    09-29 02:33 PM
    By the next Presidential Election I will have mostly gotten my green card. I know I won't be eligible to vote then, but I will still be eligible to donate to the election campaigns. I have decided right now that whatever may happen I will donate to that party which makes my journey to the green card easier and faster.

    I also have a plan B if I don't get my green card in next 24 months. I am a chemical engineer by education and profession with a US graduate degree in chemical engineering and more than 7 years of work experience in a premium organization in the oil, gas & chemicals industry. Everyone is more than aware how good the oil, gas & chemicals industry is doing worldwide. I very well know that I am a hot commodity in the job market in the whole world. Those who have traveled on Singapore Airlines must have seen advertisements in the Singapore airport displaying that oil and gas is their largest (next to Singapore Airlines) revenue making industry and they need qualified and experienced personnel. Job advertisements in the airport? Wow! Think why Alberta is the hottest place these days. I got an invitation from Canadian Government to apply for Canadian green card, citing my occupation. Australian Government has declared Chemical Engineering as the occupation with the highest demand in Australia due to their conventional mining and metals business and now the newly found gas reserves in north and west parts of that continent. This is my plan B. I have already secured an Australian Permanent Residency and that too in 6 months time. Hats off to the highly efficient immigration department of the Australian Government. In addition I already have 3 job offers there - one each in Brisbane, Melbourne and Perth.

    I have 2 burning innovative ideas in my mind - one related to biogas and carbon credits and the other related to water desalination. I have kept both of them on hold right now until I get the US green card. I know I will work on them but not sure which country gets the benefit - USA or Australia.

    Then why am I sticking around here in the US? 1. I have a US graduate degree, 2. Both my daughters are born here and are US citizens and 3. I can't deny that I have started to put down my roots here. 24 more months and will not hesitate to quit USA and settle in Australia. It will be tough, but can't help it being forced to do it.

    P.S. Two of my friends with similar background as mine, have left for Australia for good in August this year. They have settled in Sydney. Another acquaintance with occupation related to oil & gas, has migrated to Perth.



    more...


    journeyman machinist. Machinist cnc Home
  • Machinist cnc Home



  • gc_chahiye
    08-14 08:49 PM
    To United Nation

    I never went out of usa in 7 yrs.My first company did not pay me for the first 3 months because I did not get my ssn no for 3 months so I was not employed.After 3 yrs I joined the cliant company,so he got angry and did not pay me for 15 days but I have proof of time sheets.He threatned me like suing etc... but he did not do .Now I applied for AOS but I did not sent the W2 paper for that problem period .I have sent my last three years of W2 papers as per Lawyer's request .Will there be a problem for the un paid days.?

    UN can correct me, but I believe upto 180 days of out of status is automatically pardoned in EB-AOS cases. Since yours is within that limit, you should be ok.





    hair journeymen machinists journeyman machinist. Tree Journeyman 325 ballnut
  • Tree Journeyman 325 ballnut



  • pd_recapturing
    08-05 07:48 AM
    What a Bull Sh** ?? Are you saying that ppl who have applied under eb2 are the only ones who satisfy the eb2 criteria and eb3s can not satisfy the eb2 criteria ??? Come on ...this eb2 and eb3 thing is highly abused by lawyers, employers or employees .. I guess, you are in eb2 but I am sure if you go line by line of the law to recheck your eb2 eligibility, you might not even qualify for eb10,11, etc ....



    more...


    journeyman machinist. Average Journeyman Machinist salaries for job postings in Shreveport,
  • Average Journeyman Machinist salaries for job postings in Shreveport,



  • hiralal
    06-06 02:48 PM
    the above is harshly put ..should have been in better wording but sadly the essence is correct. I had similar feeling ..after years and years if they cannot give me a plastic green card then I don't want to put my hard earned money in immovable asset and keep paying extra taxes (property plus other) year after year.
    also there is a 0.000000000001 percent chance that they may come up with law of faster GC for those who buy a house (almost impossible that it will happen but who knows and might as well keep that route open :D)





    hot a journeyman machinist), journeyman machinist. Average Journeyman Machinist salaries for job postings in Tacoma,
  • Average Journeyman Machinist salaries for job postings in Tacoma,



  • unitednations
    08-02 11:54 PM
    AC21 tells that one can leave the job after 6 months of filing I485. But the green card is for future job and if anyone is not working for a company after receiving permanent job then green card can be considered as fraud.
    These 2 rules are contraditory in nature.
    Some of my friends quit the job after 6 months of I485 but after receiving GC they went back and worked for a few months.

    Generally USCIS does not have time and resource to track this. But I think they do randomly. One of my other friend resigned the job and he was doing business. He got interview and he postponed the interview to get a job and letter from his previous Company.

    If anyone is happy in their job can stay there till receiving gc. In case of layoffs there is no choice one need to invoke. Even if need to resign the Company it is better try to maintain good relationship. After 8 years GC is denied that will place in tough situation though it will happen for a few cases

    I refer back to my earlier posting where I said I just read the memos and the law and thought this stuff was pretty simple. USCIS quite often goes above and beyond (tax returns rfe's, pictures of company inside/outside).

    I'll give you some examples of what they have done of which I have intimate knowledge of:

    1) Questioned company on I-140 why they had more 140's pending/approved then the number of people on payroll. Asked for all 140 info., h1, L1 and even the people who got employment base greencard and asked company to justify where they are

    2) Department of state for visa stamping; if they don't trust client letter; they refer the case to department of state fraud unit in Kentucky. They will then contact signer of letter and HR of company to verify that person signed the letter

    3) Department of labor is on a real war path of checking companies compliance with h-1b based on referrals made by department of state. I can tell you that there is no way any company who is h-1b dependent can be 100% compliant with h-1b. Patni got fined $3.5 million for violations.

    4) Department of labor made a home visit to an HR person who was no longer working with the company to ask and verify her signatue on labor applications in a fast processing state when they weren't registered to do business there

    5) Department of labor verifying that people were paid the greencard wage upon greencard approval (this was in conjunction with h-1b investigation). I can tell you that some states have very high eb2 wages and people aren't even close to the labor number; companies do it anyways to keep you happy but do they run that number once you do get the greencard?

    6) h-1b rfe's from california service center. when quota finished in one day; there was some rumors from california service center that they would be treating h-1b transfers/quota cases very harshly in that companies were engaging in speculative employment. These days if you are involved in software and you file an h-1b transfer or even extension with california service center; you have a very good chance of getting a four page rfe. One of the things they have started to ask for is a table of people whom h-1b's have been filed for. Table has to list name, social security number, receipt number, date of birth, joining date, termination date, no show, future joining date. California service center then intertwines this information with company unemployment compensation reports. I have actually seen 3 recent denials where USCIS examined the unemployment compensation reports and looked at people who may have been paid a lower wage and pulled those people's h-1b files and denied the present case saying they can't trust the company to comply with the h-1b, lca.

    ----------------------------------------------------------

    These days; uscis/dol/dos really means business. I refer you to earlier posting of how evertime a company files a case; it gives uscis a chance to go through entire immigration history of a company. They have the resources and tools.



    more...


    house journeyman machinist. journeyman machinist. makeup Journeyman Machinist
  • makeup Journeyman Machinist



  • pete
    04-10 04:12 PM
    Its important to understand the root cause for the retrogression. Illegals dont have categories and categories in the EB GCs are there for a reason. It makes a world of a difference for somebody who is EB2 or EB3 if the person was from say.. Bangladesh. If EB2 he is all set if EB3 he will be languishing here. I am EB2 and am in trouble because of CONSULTANTS and yes I have a problem with that.





    Fighting between EB categories shows how shallow our debates can turn out to be! Rhimzim & all, do the illegals differentiate between meat packers, seamstresses, window cleaners etc.? Why waste time and energy?





    tattoo journeyman machinist. journeyman machinist. Journeyman machinists
  • Journeyman machinists



  • puddonhead
    06-07 10:27 AM
    If you look at the details I posted, only $1050 goes to interest, insurance, and taxes. $400 goes to the principal. So, compared that to my $1200 rental, it is still wise choice. Isn't it?

    As per Zillow estimate, the value of the house I bought already appreciated by $10k above the purchase price.

    For the sake of discussion that it did not appreciate in the next 10 years (which I doubt because there's no other way to go but up) but the value stayed at purchase price, as per my amortization schedule, my loan would be at 75% of the purchase value. It means therefore that I already have a 25% equity of the house, which is $60k.

    If I saved the $250 per month at zero interest, I would have $30k. I don't know where you can find 5% interest p.a. investment today but for the sake of argument that I found one, I think I can't get the $60k at the end of 10th yr.

    Off topic - but I hope you have done a proper inspection with an independent inspection agency.

    99% of all Houses built after 2000 (i.e. during the boom time) are notorious for bad build quality. Chinese Drywall (http://www.google.com/search?q=chinese+drywall) anyone?



    more...


    pictures va journeyman machinist. journeyman machinist. journeyman machinist.
  • journeyman machinist.



  • newbie2020
    08-06 04:36 PM
    People will jump to the ship which goes faster...Thats the bottom line, If tomorrow for some reason EB3 ship moves faster than EB2 ship then you would also jump your EB2 Ship and go to EB3 ship as most other people including me. Focus your energy on some positive action items which benefit the community.





    dresses Average Journeyman Machinist salaries for job postings in Tacoma, journeyman machinist. images machinist journeyman
  • images machinist journeyman



  • nogc_noproblem
    08-06 12:48 PM
    How to tell the sex of a fly

    I stopped at a friends house the other day and found him stalking around the kitchen with a flyswatter.

    When I asked if he had gotten any flies he answered, "Yeah, 5 .... 3 males and 2 females."

    Curious, I inquired as to how he could tell the difference.

    He answered, "It's easy, 3 were on a beer can and 2 were on the phone.



    more...


    makeup Machinist cnc Home journeyman machinist. journeyman machinist.
  • journeyman machinist.



  • vghc
    01-06 06:22 PM
    India has legitimate reason to attack pakistan or any terrorist camps in and out of pakistan. But our spineless leaders couldn't take any action on that. Its a shame on our leadership.

    But Palestine is not like that. They are fighting for their right. Have you ever seen or heard about how people in palestin live their day to day life? How many check points they have to cross before crossing a mile? How much time they spend waiting on each crossing?

    Don't you think they also deserve dignity? Don't you think they also live in peace and harmony? Don't you know their desperate situation? There's no electricity, no clean water, no drianage, nothing. Whole country is like a big prison. They are going thru this hardship for several decades. Everything was destroyed by the brutal force.


    Then why don't you quit your job not and fly over there to help them?
    Voicing your opinions here won't make them feel any safer.
    The world is a mess up place, most of us here can't even get our bloody greencards after years of waiting.





    girlfriend Journeyman machinists journeyman machinist. journeyman machinist.
  • journeyman machinist.



  • rsdang
    08-22 11:59 AM
    new lecturer (also a Bihari professor) was unable to control the class. The guys were just talking without giving any attention to him. So he wanted to send a guy who was creating most of the problem out. But he doesn't know how to put it in English. He went near the guy. Shouted, "follow me" .The guy followed him till he went out of the class. Now the lecturer turned back and again shouted, "Don't follow me" and went inside the class..........





    # Giving a punishment:

    *You, rotate the ground four times...

    * You, go and under-stand the tree...

    * You three of you, stand together separately.

    * Why are you late - say YES or NO....(?)



    # Sir at his best:



    Sir had once gone to a film with his wife. By chance, he happened to see one of our boys at the theatre, though the boy did not see them. So the next day at school... (To that boy) - " Yesterday I saw you WITH MY WIFE at the Cinema Theatre"





    hairstyles Average Journeyman Machinist salaries for job postings in Shreveport, journeyman machinist. journeyman machinist.
  • journeyman machinist.



  • ArkBird
    01-06 05:22 PM
    You are educated by CNN and Fox. Go see what others are saying. Don't just be one sided.

    Yes, when you kill Muslims its collateral damage. Killing school kids and bombing schools and hospital is collateral damage. If we have this mentality, yes we would see peace and harmony in this world.

    What do you mean by "Others"? Al-Jazeera? Al-Aqsa? Al-Manar?? FYI, Here are couple of Articles from the charter of Hamas. And you think Hamas is peace loving organization because........ ?

    Article 7 of the Hamas Covenant states the following: "The Day of Judgement will not come about until Muslems fight the Jews (killing the Jews), when the Jew will hide behind stones and trees. The stones and trees will say O Muslems, O Abdulla, there is a Jew behind me, come and kill him. Only the Gharkad tree, (the Cedar tree) would not do that because it is one of the trees of the Jews." (related by al-Bukhari and Muslem).

    Article 22 claims that the French revolution, the Russian revolution, colonialism and both world wars were created by the Zionists. It also claims the Freemasons and Rotary clubs are Zionist fronts. "You may speak as much as you want about regional and world wars. They were behind World War I, when they were able to destroy the Islamic Caliphate, making financial gains and controlling resources. They obtained the Balfour Declaration, formed the League of Nations through which they could rule the world. They were behind World War II, through which they made huge financial gains by trading in armaments, and paved the way for the establishment of their state. It was they who instigated the replacement of the League of Nations with the United Nations and the Security Council to enable them to rule the world through them. There is no war going on anywhere, without having their finger in it.





    learning01
    05-24 01:00 PM
    It's a request.





    SunnySurya
    08-05 10:27 AM
    I have utmost respect for you Walking_Dude. Your leadership and ethusasm is phenomenal. But even in IV , I comes before We.

    Personally, I don't think one necessary needs a immigration attorney for this. This is a public interest litigation. The task is definitly not easy but if 50 people can join hands and willing to shell out $500 dollars. It is doable. But I doubt that will happen.


    Guys,

    Ever wondered why a lawsuit never got filed against Labor Substitution, or stealing of EB Gcs by nurses, or against the discriminatory country quotas?

    Simple, you need an Immigration Attorney to file the case. The same AILA cardholding person who is expecting a windfall profit out of interfiling/PD porting. I am interested to see the immigration attorney who is willing to sacrifice profit for principle. It would be a first in history if that happen!!

    Good luck to everyone willing to participate in this wild goose chase. I guess you guys have too much money in bank to spend over such a mission impossible. If only you'd contribute equally to IV campaigns...